Subminiature 9 Pin C Type Feedthroughs

Submin-C

Subminiature 9 Pin C Type Feedthroughs

£225£529


TECHNICAL SPECS – CLICK HERE

Subminiature 9 Pin C Type Feedthroughs

Subminiature C type multipin hermetic feedthroughs are designed for applications where space is limited or where subminiature D type feedthroughs will not fit. The compact design of the feedthrough allows installation into DN16CF or KF flanges.
Nine gold plated pins are orientated in a straight through pin-to-pin design pattern and are hermetically sealed and electrically insulated into the stainless steel shell using the latest in glass-ceramic bonding technology.
Subminiature C type feedthroughs are available either individually or as kits*, which include both air and vacuum service cable assemblies. Air and vacuum side connectors are fitted with captured stainless steel socket head screws that provides a means of securely locking them to their mating feedthroughs. On the vacuum side, Kapton® insulated cable assemblies fitted with PEEK connectors are available to meet the demands of UHV environments. In-vacuum connector screws are vented where required and the feedthrough’s screw boss acts as a locating key for connector insertion. Air to vacuum pin position is identified with a permanent surface mark, which clearly locates pin assignments.

Stated electrical ratings are maximum test values. Feedthroughs are intended for instrumentation applications carrying low level signal voltages and currents.

For proper heat dissipation a maximum of 20% of the pins on a feedthrough may carry the maximum current at any one time.

* – Kits are supplied with in-vacuum cable 482mm long & air service cable 2438mm long.

Features:
 9 pin configuration.
 High temperature rated to 250°C.
 UHV compatible construction.
 Kapton® insulated in-vacuum cables.
 Air & vacuum side connectors available.
Specifications:
Voltage1  :  300VDC max
Current1  :  5A max @ 20°C
Material
        Flange  :  304 St.St.
        Shell  :  304 St.St
        Pin  :  Gold plated Ni-Fe alloy
        Insulation  :  Glass Ceramic
        Connector, air / vacuum3  :  Delrin® / PEEK
Temperature Range2
        CF flanged feedthrough  :  -200°C to 250°C
        KF flanged feedthrough  :  -20°C to 150°C
        Vacuum side connector  :  -200°C to 250°C
        Air side connector  :  -65°C to 80°C
Max. Thermal Gradient  :  25°C / minute
_________________________________________
1 - Please see section introduction for safety information. Stated electrical ratings are maximum test values. Feedthroughs are
intended for instrumentation applications carrying low level signal voltages and currents.
2 - Assembly rating is reduced to that of the lowest rated component.
3 - PEEK is a polyetheretherketone thermoplastic.

Product CodeFig. No.No. PinsDescriptionPriceQuantityPDF & STP
C9KIT-16CF 1 9 C9 F/T ON DN16CF + UHV & AIR CABLES WITH CONNECTORS £489
    C9KIT-40CF 1 9 C9 F/T ON DN40CF + UHV & AIR CABLES WITH CONNECTORS £529
      C9-16CF 1 9 C9 F/T ON DN16CF £225
      C9-40CF 1 9 C9 F/T ON DN40CF £250
      C9-2-40CF 1 18 C9 F/T X2 ON DN40CF £467
      C9KIT-16KF 29 C9 F/T ON DN16KF + UHV & AIR CABLES WITH CONNECTORS £489
        C9-16KF 29 C9 F/T ON DN16KF £225
        C9-25KF 29 C9 F/T ON DN25KF £252
        C9-40KF 29 C9 F/T ON DN40KF £250
        C9-2-40KF 2 18 C9 F/T X2 ON DN40KF £467
        SKU: N/A Category:
        There are no products