Compact & Mini Z Translators DN16CF

This compact range of DN16CF Z translators has cantilevered flange supports with wrap around flange brackets (see drawing). A total of six locking screws (three for each flange) hold the flanges within the brackets. The advantage of this design is that these screws can be loosened, even while the translator is installed, and the actuator portion of the translator can be repositioned radially around the flange. This allows positioning of the translator to clear other equipment. The guide rods and actuation screw are set back from the flange to give maximum access to the flange bolts. Despite their modest price, these will provide years of trouble-free service, especially if the simple maintenance is performed. Bearings are lubricated with MoS2 grease for low friction and long life. All parts are field replaceable. All translators are also available with long strokes, motor drives, linear encoders, tapped flanges and special height.

Compact Z stages have clearance holes, Mini Z have tapped flanges.

Standard specifications are shown here, special versions can be made to suit your individual requirements.
Please contact our sales office for further information.

Specifications:

Materials
Bellow & flanges : Stainless steel
Mounting brackets :  Anodised Aluminium
Lead Screw : Stainless steel
Bushing : Bearing bronze

Vacuum Range : atm to 1×10^-11mbar

Temperature Range*: -20 to 210°C (250°C for mini Z)

* – Assembly rating must be reduced to that of lowest rated component

Please note : The photograph shows a special version of M-CZ25R-16CF with micrometer in place of standard handwheel.