Port Aligners With Pivot Mounts

PA port aligner

Port Aligners With Pivot Mounts



Port Aligners With Pivot Mounts

Three left/right threaded hexnuts allow for angular as well as linear adjustment. The alignment screws are equipped with pivot mounts on one end and are bolted to the CF Flange on the other end. The bellows allows the flanges to tilt ± 5 degrees, total. This makes for easy alignment of long devices like magnetic introduction and sample transfer rods.

Flanges & Bellows : Stainless steel

Vacuum Range : atm to 1×10-11mbar

Temperature Range*: -20 to 210°C
* – Assembly rating must be reduced to that of lowest rated component

Product CodeFlangesBoreDLPriceQuantityPDF & STP
M-PA-16CF-F5 DN16CF 16.0 55.0 51.0±6.0 P.O.A
M-PA-40CF-F5 DN40CF 38.0 94.0 90.0±5.0 P.O.A
M-PA-63CF-F5 DN63CF 65.0 156.0 100.0±5.0 P.O.A
M-PA-100CF-F5 DN100CF 104.0 195.0 100.0±5.0 P.O.A
SKU: N/A Category:
There are no products