Standard Port Aligners
P.O.A
TECHNICAL SPECS – CLICK HERE
Standard Port Aligners
Sometimes a port on the vacuum chamber just doesn’t quite point where it should. The MPA’ port aligner solves this with two UHV flanges connected by a short section of welded bellows and a sturdy clamping mechanism. The bellows allows the flanges to tilt ± 1 degrees, total. This makes for easy alignment of long devices like magnetic introduction and sample transfer rods. An arc of 2 degrees subtends a chordal distance of more than 25mm (1”) at a distance of 750mm (30”), giving lots of adjustment range.
Specifications:
Materials
Flanges & Bellows : Stainless steel
Clamping brackets : Anodised aluminium
Vacuum Range : atm to 1×10-11mbar
Temperature Range*: -20 to 210°C
* – Assembly rating must be reduced to that of lowest rated component
Product Code | Flanges | ID | OD | A | Price | Quantity | PDF & STP | |
---|---|---|---|---|---|---|---|---|
M-PA-40CF | DN40CF | 38.1 | 108.0 | 44.5 | P.O.A | |||
M-PA-63CF | DN63CF | 72.8 | 146.1 | 66.8 | P.O.A |