Precision X-Y Manipulator Stages

M-XY12-38-40CF

Precision X-Y Manipulator Stages

P.O.A

 

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save

Save


TECHNICAL SPECS – CLICK HERE

Precision X-Y Manipulator Stages

Our range of X-Y stages combine extremely high rigidity, a large working bore and affordable cost. They are available in both ± 25.4mm (± 1 inch) and ± 12.7mm (± 1/2 inch) travel, circular pattern, with both manual and stepper motorized versions. In fact, conversion from micrometers to stepper motors can be done in 15 minutes at the user’s site. Both sizes have features not found on translators available elsewhere, such as tilt adjustment on the top flange as standard.
One distinct advantage of these stages is the cost savings when long Z axis strokes are required. Since only the bellows in the XY portion needs to be larger than the probe, the user can extend the Z axis stroke using a smaller diameter (less costly) bellows that just clears the probe running through it. Simply select the model from the tables that best suits your needs.
For horizontal mounting, i.e., with the flange faces vertical, dual constant force counterbalance springs are available that compensate for gravitational loads. If required, this feature can be added in the field, after the user accurately determines the weight of the devices to be mounted.
To make your selection, add the total travel required in either the X or Y axis to the maximum diameter of the device that will pass through the stage. This sum determines the minimum bellows inside diameter (clear ID).
Next, select the bottom flange that best mates to your chamber or other equipment. While the most common size is DN100CF, either tapped or non-tapped flange sizes of DN63CF, DN100CF, DN160CF and larger are available.
Standard specifications are shown here, special versions can be made to suit your individual requirements.
Please contact our sales office for further information.

Specifications:

Materials
Bellow & flanges : Stainless steel

Mounting brackets :  Anodised Aluminium
Bearings : Stainless steel

Resolution
With small micrometers (standard) : >10µm
With large micrometers : >2.5µm
Repeatability
With small micrometers (standard) >5µm
With large micrometers >1.25µm

Vacuum Range : atm to 1×10-11mbar

Temperature Range*: -20 to 210°C
* – Assembly rating must be reduced to that of lowest rated component

Options:
 DN40CF versions also available.
 Clearance hole flanges available on both top & bottom flanges, (Height, H increases).
 Large micrometers.
 Stepper motor actuation.
 Horizontal mount kit.
 Additional axis.


Product CodeX Y travelClear IDABCHPriceQuantityPDF & STP
M-XY12-38-40CF ±12.7 38.0 202.7 129.5 267.5 114.3 P.O.A
M-XY12-72-63CF ±12.7 72.0 226.8 182.6 316.2 117.4 P.O.A
M-XY25-72-63CF ±25.4 72.0 297.4 208.0 401.4 142.7 P.O.A
    M-XY12-72-100CF ±12.7 72.0 253.5 242.3 374.7 120.7 P.O.A
    M-XY25-72-100CF ±25.4 72.0 253.5 242.3 374.7 146.1 P.O.A
    M-XY12-101-100CF ±12.7 100.3 253.5 242.3 374.7 120.7 P.O.A
    M-XY25-101-100CF ±25.4 100.3 253.5 242.3 374.7 155.4 P.O.A
    M-XY12-150-160CF ±12.7 149.1 330.2 292.1 476.3 165.1 P.O.A
    M-XY25-150-160CF ±25.4 149.1 330.2 292.1 476.3 TBC P.O.A
      SKU: N/A Category:
      There are no products